UniLab - From University to Labour market in the 21st Century: a step forward in work-based Placements

Department of Science & Technology

Project Description

IMC University of Applied Sciences Krems was partner in the Erasmus+ project "UniLab".

The collaboration between universities and the industry is increasingly perceived as a vehicle to enhance innovation through knowledge exchange. This project involved four EU countries (Belgium, Spain, Austria and France) and three partner countries (Russia, Belarus and Azerbaijan).

The aim of the project was to work on issues that are common in all partner country universities, such as the need for practical placement and further employment, the need for Career Centres more involved in practical placement procedures, the improvement of practical placement guidance, and the improvement of perspectives of employment

More information can be found on the project website: unilab.eucen.eu

Further Information
Status: Ongoing
Project ID : 1205
Sponsor :
EU

Project Leader
Prof.(FH) Dipl. Ing. Dr. techn. Deepak Dhungana
Head of Institute Digitalisation and Informatics / Programme Director Informatics
Prof.(FH) Dipl. Ing. Dr. techn. Deepak Dhungana
Head of Institute Digitalisation and Informatics / Programme Director Informatics
Institute Digitalisation and Informatics
+43 2732 802 151
[email protected]
IMC Campus KremsIMC Campus Trakt G
Software Engineering, Requirements Engineering, Software Architecture, Systems design- analysis and validation
Adaptability and Flexiblilty in Systems design, Configuration and Re-configuration of systems, Product Line Engineering
Data-driven Systems, Business Analytics and Monitoring, Industry 4.0
Informatics
Bachelor of Science in Engineering / full-time
Kursplanung in modularen Schulsystemen
Department of Science & Technology
FLEXCRASH - Flexible und hybride Herstellung von grünem Aluminium zur Herstellung maßgeschneiderter adaptiver crashtoleranter Strukturen
Department of Science & Technology
BRfit für Künstliche Intelligenz
Department of Business
Studie zum Schutz von Geschäftsgeheimnissen im Kontext der Data Economy
Department of Business
Museumspädagogik und Augmented Reality: Anerkennung von Museen als Bildungsräume
Project Leader, Department of Science & Technology
UniLab - Von der Universität zum Arbeitsmarkt im 21. Jahrhundert: ein Schritt vorwärts in der Vermittlung von Praktikumsplätzen
Project Leader, Department of Science & Technology
Digital Innovation Hub OST (DIHOST)
Department of Science & Technology
Ruiz-Torrubiano, R., Dhungana, D., Kormann-Hainzl, G., Paudel, S. (2023): SSDL: A Domain-Specific Modeling Language for Smart City Services. In Meierhofer, J., West, S., Buecheler, T. (Hrsg.), Smart Services Summit. SMSESU 2022. Progress in IS (113-121). Zürich, Switzerland: Springer, Cham.
Doi: https://doi.org/10.1007/978-3-031-36698-7_12
Dhungana, D., Haselböck, A., Ruiz-Torrubiano, R., Wallner, S. (2023): Building Optimal Consortia in Smart Production Ecosystems. In Galizia, F.G., Bortolini, M. (Hrsg.), Proceedings of the 9th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2023) and the 11th World Mass Customization & Personalization Conference (MCPC2023), Bologna, Italy, June 2023 (790-798). Bologna, Italy: Springer.
Doi: https://doi.org/10.1007/978-3-031-34821-1_86
Dhungana, D., Haselböck, A., Ruiz-Torrubiano, R., Wallner, S. (2022): Variability of safety risks in production environments. In Alexander Felfernig et. al. (Hrsg.), SPLC '22: Proceedings of the 26th ACM International Systems and Software Product Line Conference (178-187). Graz, Austria: Association for Computing Machinery.
Doi: https://doi.org/10.1145/3546932.3547074
Bal, J., Dhungana, D., Karagiorgos, S., Mageirias, S., Pitnik, C., Vlachopoulos, D. (2021): MONA PROJECT: INTEGRATING MODERN TECHNOLOGIES IN MUSEUM EDUCATION. In Bal, J., Dhungana, D., Karagiorgos, S., Mageirias, S., Pitnik, C., Vlachopoulos, D. (Hrsg.), ICERI2021 Proceedings (8064-8070). -: Iated.
Doi: https://doi.org/10.21125/iceri.2021.1823
Dhungana, D., Haselböck, A., Schmidbauer, C., Taupe, R., Wallner, S., (2021): Enabling Resilient Production Through Adaptive Human-Machine Task Sharing. In Andersen AL. et al. (Hrsg.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. Cham: Springer.
Doi: https://doi.org/10.1007/978-3-030-90700-6_22
Dhungana, D., Haselböck, A., Meixner, S., Schall, D., Schmid, J., Trabesinger, S., Wallner, S. (2021): Multi-factory production planning using edge computing and IIoT platforms. Journal of Systems and Software, 182(0164-1212).
Doi: https://doi.org/10.1016/j.jss.2021.111083
Pfiel, S., Lovasz-Bukvova, H., Tiefenbacher, F., Hopp, M., Schuster, R., Reiner, M., Dhungana, D. (2021): Virtual Reality Applications for Experiential Tourism - Curator Application for Museum Visitors. In Yilmaz, M., Clarke, P., Messnarz, R., Reiner, M. (Hrsg.), Systems, Software and Services Process Improvement (716ff). Krems: Springer.
Doi: https://doi.org/10.1007/978-3-030-85521-5_49
Hage R., Lovasz-Bukvova, H., Hopp, M., Hölzl, M., Kormann-Hainzl G., Reiner, M., Dhungana, D. (2021): Agile Approach for E-Learning in Digital-Leadership Training for Small and Medium Enterprises. In Softic, S.K., Read, T. (Hrsg.), Proceedings of the EDEN Annual Conference: Lessons Learned from the Pandemic. Madrid: EDEN.
Grünbacher, P., Seidl, C., Dhungana, D., Lovasz-Bukvova, H. (Hrsg.). (2021): VaMoS'21: 15th International Working Conference on Variability Modelling of Software-Intensive Systems, Virtual Event / Krems, Austria, February 9-11, 2021. Krems: ACM.
Doi: https://doi.org/10.1145/3442391
Dhungana, D., Haelböck, A., Wallner, S. (2020): Generation of Multi-factory Production Plans: Enabling Collaborative Lot-size-one Production. In - (Hrsg.), Euromicro Conference on Software Engineering and Advanced Applications, SEAA 2020 (529-536). Portoroz, Slovenia: IEEE.
Doi: https://doi.org/10.1109/SEAA51224.2020.00088
Dhungana, D. (2018): Customer Co-Creation in Smart Production Ecosystems - Opportunities and Challenges for MDE. In Hammoudi, S., Ferreira Pires, L., Selic, B. (Hrsg.), Proceedings of the 6th International Conference on Model-Driven Engineering and Software Development - Volume 1: IndTrackMODELSWARD (625-631). Funchal, Madeira, Portugal: SciTePress.
Doi: https://doi.org/10.5220/0006731206250631
Dhungana, D., Falkner, A., Haselböck, A., Taupe, R. (2017): Enabling Integrated Product and Factory Configuration in Smart Production Ecosystems. In - (Hrsg.), 43rd Euromicro Conference on Software Engineering and Advanced Applications, SEAA 2017, Vienna, Austria, August 30 - Sept. 1, 2017 (266-273). Vienna, Austria: IEEE Computer Society.
Doi: https://doi.org/10.1109/SEAA.2017.26
Dhungana, D., Engelbrecht, G., Parreira, J., Schuster, A., Tobler, R., Valerio, D. (2016): Data-driven ecosystems in smart cities: A living example from Seestadt Aspern. In - (Hrsg.), 3rd IEEE World Forum on Internet of Things, WF-IoT 2016, Reston, VA, USA, December 12-14, 2016 (82-87). Reston, VA, USA: IEEE Computer Society.
Doi: https://doi.org/10.1109/WF-IoT.2016.7845434
Dhungana, D., Engelbrecht, G., Parreira, J., Schuster, A., Valerio, D. (2015): Aspern smart ICT: Data analytics and privacy challenges in a smart city. In - (Hrsg.), 2nd IEEE World Forum on Internet of Things, WF-IoT 2015, Milan, Italy, December 14-16, 2015 (447-452). Milan, Italy: IEEE Computer Society.
Doi: https://doi.org/10.1109/WF-IoT.2015.7389096
Dhungana, D., Falkner, A., Haselböck, A., Schreiner, H. (2015): Smart factory product lines: a configuration perspective on smart production ecosystems. In Schmidt, D. (Hrsg.), Proceedings of the 19th International Conference on Software Product Line, SPLC 2015, Nashville, TN, USA, July 20-24, 2015 (201-210). Nashville, TN, USA: ACM.
Doi: https://doi.org/10.1145/2791060.2791066
Galindo, J., Dhungana, D., Rabiser, R., Benavides, D., Botterweck, G., Grünbacher, P. (2015): Supporting distributed product configuration by integrating heterogeneous variability modeling approaches. Inf. Softw. Technol., 62: 78-100.
Doi: https://doi.org/10.1016/j.infsof.2015.02.002
Parreira, J., Dhungana, D., Engelbrecht, G. (2015): The Role of RDF Stream Processing in an Smart City ICT Infrastructure - The Aspern Smart City Use Case. In Gandon, F., Gueret, C., Villata, S., Breslin, J., Faron-Zucker, C., Zimmermann, A. (Hrsg.), The Semantic Web: ESWC 2015 Satellite Events - ESWC 2015 Satellite Events Portorovz, Slovenia, May 31 - June 4, 2015, Revised Selected Papers (343-352). Portorovz, Slovenia: Springer.
Doi: https://doi.org/10.1007/978-3-319-25639-9\_47
Gnesi, S., Heymans, P., Rubin, J., Czarnecki, K., Dhungana, D., Fantechi, A. (Hrsg.). (2014): Proceedings of 18th International Software Product Line Conference, SPLC 14. New York, USA: ACM.
Doi: https://doi.org/10.1145/2648511
Rabiser, R., Vierhauser, M., Grünbacher, P., Dhungana, D., Schreiner, H., Lehofer, M. (2014): Supporting Multiplicity and Hierarchy in Model-Based Configuration: Experiences and Lessons Learned. In Dingel, J., Schulte, W., Ramos, I., Abrahao, S., Insfran, E. (Hrsg.), Model-Driven Engineering Languages and Systems - 17th International Conference, MODELS 2014, Valencia, Spain, September 28 - October 3, 2014. Proceedings (320-336). Valencia, Spain: Springer.
Doi: https://doi.org/10.1007/978-3-319-11653-2\_20
Dhungana, D., Schreiner, H., Lehofer, M., Vierhauser, M., Rabiser, R., Grünbacher, P. (2014): Modeling multiplicity and hierarchy in product line architectures: extending a decision-oriented approach. In Liu, A., Klein, J., Tang, A. (Hrsg.), Proceedings of the WICSA 2014 Companion Volume, Sydney, NSW, Australia, April 7-11, 2014 (11:1-11:6). Sydney, NSW, Australia: ACM.
Doi: https://doi.org/10.1145/2578128.2578236
Dhungana, D., Hoo Tang, C., Weidenbach, C., Wischnewski, P. (2013): Automated Verification of Interactive Rule-Based Configuration Systems (Additional Material). CoRR, abs/1309.0065.
Doi: https://doi.org/10.1109/ASE.2013.6693112
Dhungana, D., Hoo Tang, C., Weidenbach, C., Wischnewski, P. (2013): Automated verification of interactive rule-based configuration systems. In Denney, E., Bultan, T., Zeller, A. (Hrsg.), 2013 28th IEEE/ACM International Conference on Automated Software Engineering, ASE 2013, Silicon Valley, CA, USA, November 11-15, 2013 (551-561). Silicon Valley, CA, USA: IEEE.
Doi: https://doi.org/10.1109/ASE.2013.6693112
Dhungana, D., Falkner, A., Haselböck, A. (2013): Generation of conjoint domain models for system-of-systems. In Järvi, J., Kästner, C. (Hrsg.), Generative Programming: Concepts and Experiences, GPCE13, Indianapolis, IN, USA - October 27 - 28, 2013 (159-168). Indianapolis, IN, USA: ACM.
Doi: https://doi.org/10.1145/2517208.2517224
Botterweck, G., Dhungana, D., Noda, N., Rabiser, R., Washizaki, H. (2013): Joint Workshop of the 5th International Workshop on Model-Driven Approaches in Software Product Line Engineering and the 4th Workshop on Scalable Modeling Techniques for Software Product Lines (MAPLE/SCALE 2013). In Kishi, T., Jarzabek, S., Gnesi, S. (Hrsg.), 17th International Software Product Line Conference, SPLC 2013, Tokyo, Japan - August 26 - 30, 2013 (268). Tokyo, Japan: ACM.
Doi: https://doi.org/10.1145/2491627.2499881
Dhungana, D., Seichter, D., Botterweck, G., Rabiser, R., Grünbacher, P., Benavides, D., Galindo, J. (2013): Integrating heterogeneous variability modeling approaches with invar. In Gnesi, S., Collet, P., Schmid, K. (Hrsg.), The Seventh International Workshop on Variability Modelling of Software-intensive Systems, VaMoS 13, Pisa , Italy, January 23 - 25, 2013 (8:1-8:5). Pisa, Italy: ACM.
Doi: https://doi.org/10.1145/2430502.2430514
Pleuss, A., Botterweck, G., Dhungana, D., Polzer, A., Kowalewski, S. (2012): Model-driven support for product line evolution on feature level. J. Syst. Softw., 85(10): 2261-2274.
Doi: https://doi.org/10.1016/j.jss.2011.08.008
Nöbauer, N., Seyff, N., Groher, I., Dhungana, D. (2012): A Lightweight Approach for Product Line Scoping. In Cortellessa, V., Muccini, H., Demirörs, O. (Hrsg.), 38th Euromicro Conference on Software Engineering and Advanced Applications, SEAA 2012, Cesme, Izmir, Turkey, September 5-8, 2012 (105-108). Cesme, Izmir, Turkey: IEEE Computer Society.
Doi: https://doi.org/10.1109/SEAA.2012.81
Botterweck, G., Dhungana, D., Rabiser, R. (2012): Fourth International Workshop on Model-driven Approaches in Software Product Line Engineering (MAPLE 2012). In Eduardo Santana de Almeida and Christa Schwanninger and David Benavides (Hrsg.), 16th International Software Product Line Conference, SPLC 12, Salvador, Brazil - September 2-7, 2012, Volume 1 (288-289). Salvador, Brazil: ACM.
Doi: https://doi.org/10.1145/2362536.2362577
Pleuss, A., Hauptmann, B., Dhungana, D., Botterweck, G. (2012): User interface engineering for software product lines: the dilemma between automation and usability. In Diniz Junqueira Barbosa, S., Creissac Campos, J., Kazman, R., Palanque, P., Harrison, M., Reeves, S. (Hrsg.), ACM SIGCHI Symposium on Engineering Interactive Computing Systems, EICS12, Copenhagen, Denmark - June 25 - 28, 2012 (25-34). Copenhagen, Denmark: ACM.
Doi: https://doi.org/10.1145/2305484.2305491
Nöbauer, M., Seyff, N., Dhungana, D., Stoiber, R. (2012): Managing variability of ERP ecosystems: research issues and solution ideas from Microsoft Dynamics AX. In Eisenecker, U., Apel, S., Gnesi, S. (Hrsg.), Sixth International Workshop on Variability Modelling of Software-Intensive Systems, Leipzig, Germany, January 25-27, 2012. Proceedings (21-26). Leipzig, Germany: ACM.
Doi: https://doi.org/10.1145/2110147.2110150
Danar Sunindyo, W., Moser, T., Winkler, D., Dhungana, D. (2012): Improving Open Source Software Process Quality Based on Defect Data Mining. In Biffl, S., Winkler, D., Bergsmann, J. (Hrsg.), Software Quality. Process Automation in Software Development - 4th International Conference, SWQD 2012, Vienna, Austria, January 17-19, 2012. Proceedings (84-102). Vienna, Austria: Springer.
Doi: https://doi.org/10.1007/978-3-642-27213-4\_7
Beecham, S., Noll, J., Richardson, I., Dhungana, D. (2011): A Decision Support System for Global Software Development. In - (Hrsg.), 6th IEEE International Conference on Global Software Engineering, ICGSE 2011, Workshop Proceedings, Helsinki, Finland, August 15-18, 2011 (48-53). Helsinki, Finland: IEEE Computer Society.
Doi: https://doi.org/10.1109/ICGSE-W.2011.20
Dhungana, D., Falkner, A., Haselböck, A. (2011): Configuration of Cardinality-Based Feature Models Using Generative Constraint Satisfaction. In - (Hrsg.), 37th EUROMICRO Conference on Software Engineering and Advanced Applications, SEAA 2011, Oulu, Finland, August 30 - September 2, 2011 (100-103). Oulu, Finland: IEEE Computer Society.
Doi: https://doi.org/10.1109/SEAA.2011.24
Dhungana, D., Seichter, D., Botterweck, G., Rabiser, R., Grünbacher, P., Benavides, D., Galindo, J. (2011): Configuration of Multi Product Lines by Bridging Heterogeneous Variability Modeling Approaches. In Santana de Almeida, E., Kishi, T., Schwanninger, C., John, I., Schmid, K. (Hrsg.), Software Product Lines - 15th International Conference, SPLC 2011, Munich, Germany, August 22-26, 2011 (120-129). Munich, Germany: IEEE Computer Society.
Doi: https://doi.org/10.1109/SPLC.2011.22
Botterweck, G., Noda, N., Dhungana, D., Rabiser, R., Babar, M., Cohen, S., Kang, C., Kishi, T. (2011): Joint Workshop of the Third International Workshop on Model-Driven Approaches in Software Product Line Engineering and the Third Workshop on Scalable Modeling Techniques for Software Product Lines (MAPLE/SCALE 2011). In Santana de Almeida, E., Kishi, T., Schwanninger, C., John, I., Schmid, K. (Hrsg.), Software Product Lines - 15th International Conference, SPLC 2011, Munich, Germany, August 22-26, 2011 (340). Munich, Germany: IEEE Computer Society.
Doi: https://doi.org/10.1109/SPLC.2011.42
Franch, X., Grünbacher, P., Oriol, M., Burgstaller, B., Dhungana, D., Lopez, L., Marco, J., Pimentel, J. (2011): Goal-Driven Adaptation of Service-Based Systems from Runtime Monitoring Data. In - (Hrsg.), Workshop Proceedings of the 35th Annual IEEE International Computer Software and Applications Conference, COMPSAC Workshops 2011, Munich, Germany, 18-22 July 2011 (458-463). Munich, Germany: IEEE Computer Society.
Doi: https://doi.org/10.1109/COMPSACW.2011.83
Mordinyi, R., Moser, T., Biffl, S., Dhungana, D. (2011): Flexible Support for Adaptable Software and Systems Engineering Processes. In - (Hrsg.), Proceedings of the 23rd International Conference on Software Engineering & Knowledge Engineering (SEKE2011), Eden Roc Renaissance, Miami Beach, USA, July 7-9, 2011 (608-612). Miami Beach, USA: Knowledge Systems Institute Graduate School.
Dhungana, D., Seyff, N., Graf, F. (2011): Research Preview: Supporting End-User Requirements Elicitation Using Product Line Variability Models. In Berry, D., Franch, X. (Hrsg.), Requirements Engineering: Foundation for Software Quality - 17th International Working Conference, REFSQ 2011, Essen, Germany, March 28-30, 2011. Proceedings (66-71). Essen, Germany: Springer.
Doi: https://doi.org/10.1007/978-3-642-19858-8\_8
Dhungana, D., Grünbacher, P., Rabiser, R. (2011): The DOPLER meta-tool for decision-oriented variability modeling: a multiple case study. Autom. Softw. Eng., 18(1): 77-114.
Doi: https://doi.org/10.1007/s10515-010-0076-6
Thiel, S., Rabiser, R., Dhungana, D., Cawley, C. (2010): 3rd International Workshop on Visualisation in Software Product Line Engineering (VISPLE 2010). In Bosch, J., Lee, J. (Hrsg.), Software Product Lines: Going Beyond - 14th International Conference, SPLC 2010, Jeju Island, South Korea, September 13-17, 2010. Proceedings (527). Jeju Island, South Korea: Springer.
Doi: https://doi.org/10.1007/978-3-642-15579-6\_65
Dhungana, D., Rabiser, R., Seyff, N., Botterweck, G. (Hrsg.). (2010): Proceedings of the 1st International Workshop on Automated Configuration and Tailoring of Applications. Antwerp, Belgium: CEUR-WS.org.
Dhungana, D., Groher, I., Rabiser, R., Thiel, S. (2010): 2nd International Workshop on Model-Driven Approaches in Software Product Line Engineering (MAPLE 2010). In Bosch, J., Lee, J. (Hrsg.), Software Product Lines: Going Beyond - 14th International Conference, SPLC 2010, Jeju Island, South Korea, September 13-17, 2010. Proceedings (525). Jeju Island, South Korea: Springer.
Doi: https://doi.org/10.1007/978-3-642-15579-6\_63
Dhungana, D., Groher, I., Schludermann, E., Biffl, S. (2010): Software ecosystems vs. natural ecosystems: learning from the ingenious mind of nature. In Gorton, I., Cuesta, C., Babar, M. (Hrsg.), Software Architecture, 4th European Conference, ECSA 2010, Copenhagen, Denmark, August 23-26, 2010. Companion Volume (96-102). Copenhagen, Denmark: ACM.
Doi: https://doi.org/10.1145/1842752.1842777
Seichter, D., Dhungana, D., Pleuss, A., Hauptmann, B. (2010): Knowledge management in software ecosystems: software artefacts as first-class citizens. In Gorton, I., Cuesta, C., Babar, M. (Hrsg.), Software Architecture, 4th European Conference, ECSA 2010, Copenhagen, Denmark, August 23-26, 2010. Companion Volume (119-126). Copenhagen, Denmark: ACM.
Doi: https://doi.org/10.1145/1842752.1842780
Heider, W., Froschauer, R., Grünbacher, P., Rabiser, R., Dhungana, D. (2010): Simulating evolution in model-based product line engineering. Inf. Softw. Technol., 52(7): 758-769.
Doi: https://doi.org/10.1016/j.infsof.2010.03.007
Dhungana, D., Grünbacher, P., Rabiser, R., Neumayer, T. (2010): Structuring the modeling space and supporting evolution in software product line engineering. J. Syst. Softw., 83(7): 1108-1122.
Doi: https://doi.org/10.1016/j.jss.2010.02.018
Botterweck, G., Pleuss, A., Dhungana, D., Polzer, A., Kowalewski, S. (2010): EvoFM: feature-driven planning of product-line evolution. In Rubin, J., Botterweck, G., Mezini, M., Maman, I., Pleuss, A. (Hrsg.), Proceedings of the 2010 ICSE Workshop on Product Line Approaches in Software Engineering, PLEASE 2010, Cape Town, South Africa, May 2, 2010 (24-31). Cape Town, South Africa: ACM.
Doi: https://doi.org/10.1145/1808937.1808941
Rabiser, R., Grünbacher, P., Dhungana, D. (2010): Requirements for product derivation support: Results from a systematic literature review and an expert survey. Inf. Softw. Technol., 52(3): 324-346.
Doi: https://doi.org/10.1016/j.infsof.2009.11.001
Dhungana, D., Heymans, P., Rabiser, R. (2010): A Formal Semantics for Decision-oriented Variability Modeling with DOPLER. In Benavides, D., Batory, D., Grünbacher, P. (Hrsg.), Fourth International Workshop on Variability Modelling of Software-Intensive Systems, Linz, Austria, January 27-29, 2010. Proceedings (29-35). Linz, Austria: Universität Duisburg-Essen.
Pleuss, A., Botterweck, G., Dhungana, D. (2010): Integrating Automated Product Derivation and Individual User Interface Design. In Benavides, D., Batory, D., Grünbacher, P. (Hrsg.), Fourth International Workshop on Variability Modelling of Software-Intensive Systems, Linz, Austria, January 27-29, 2010. Proceedings (69-76). Linz, Austria: Universität Duisburg-Essen.
Vierhauser, M., Dhungana, D., Heider, W., Rabiser, R., Egyed, A. (2010): Tool Support for Incremental Consistency Checking on Variability Models. In Benavides, D., Batory, D., Grünbacher, P. (Hrsg.), Fourth International Workshop on Variability Modelling of Software-Intensive Systems, Linz, Austria, January 27-29, 2010. Proceedings (171-174). Linz, Austria: Universität Duisburg-Essen.
Rabiser, R., Dhungana, D., Heider, W., Grünbacher, P. (2009): Flexibility and End-User Support in Model-Based Product Line Tools. In - (Hrsg.), 35th Euromicro Conference on Software Engineering and Advanced Applications, SEAA 2009, Patras, Greece, August 27-29, 2009, Proceedings (508-511). Patras, Greece: IEEE Computer Society.
Doi: https://doi.org/10.1109/SEAA.2009.13
Grünbacher, P., Rabiser, R., Dhungana, D., Lehofer, M. (2009): Model-Based Customization and Deployment of Eclipse-Based Tools: Industrial Experiences. In - (Hrsg.), ASE 2009, 24th IEEE/ACM International Conference on Automated Software Engineering, Auckland, New Zealand, November 16-20, 2009 (247-256). Auckland, New Zealand: IEEE Computer Society.
Doi: https://doi.org/10.1109/ASE.2009.11
Heider, W., Rabiser, R., Dhungana, D., Grünbacher, P. (2009): Tracking Evolution in Model-based Product Lines. In Botterweck, G., Groher, I., Polzer, A., Schwanninger, C., Thiel, S., Voelter, M. (Hrsg.), Proceedings of the 1st International Workshop on Model-driven Approaches in Software Product Line Engineering (MAPLE 2009), collocated with the 13th International Software Product Line Conference (SPLC 2009), San Francisco, USA, August 24, 2009. San Francisco, USA: CEUR-WS.org.
Dhungana, D., Groher, I. (2009): Genetics as a role model for software variability management. In - (Hrsg.), 31st International Conference on Software Engineering, ICSE 2009, May 16-24, 2009, Vancouver, Canada, Companion Volume (239-242). Vancouver, Canada: IEEE.
Doi: https://doi.org/10.1109/ICSE-COMPANION.2009.5070991
Grünbacher, P., Rabiser, R., Dhungana, D., Lehofer, M. (2009): Structuring the Product Line Modeling Space: Strategies and Examples. In Benavides, D., Metzger, A., Eisenecker, U. (Hrsg.), Third International Workshop on Variability Modelling of Software-Intensive Systems, Seville, Spain, January 28-30, 2009. Proceedings (77-82). Seville, Spain: Universität Duisburg-Essen.
Wolfinger, R., Reiter, S., Dhungana, D., Grünbacher, P., Prähofer, H. (2008): Supporting Runtime System Adaptation through Product Line Engineering and Plug-in Techniques. In - (Hrsg.), Seventh International Conference on Composition-Based Software Systems (ICCBSS 2008), February, 25-29, 2008, Madrid, Spain, Proceedings (21-30). Madrid, Spain: IEEE Computer Society.
Doi: https://doi.org/10.1109/ICCBSS.2008.30
Grünbacher, P., Rabiser, R., Dhungana, D. (2008): Product Line Tools are Product Lines Too: Lessons Learned from Developing a Tool Suite. In - (Hrsg.), 23rd IEEE/ACM International Conference on Automated Software Engineering (ASE 2008), 15-19 September 2008, LAquila, Italy (351-354). LAquila, Italy: IEEE Computer Society.
Doi: https://doi.org/10.1109/ASE.2008.46
Dhungana, D., Neumayer, T., Grünbacher, P., Rabiser, R. (2008): Supporting Evolution in Model-Based Product Line Engineering. In - (Hrsg.), Software Product Lines, 12th International Conference, SPLC 2008, Limerick, Ireland, September 8-12, 2008, Proceedings (319-328). Limerick, Ireland: IEEE Computer Society.
Doi: https://doi.org/10.1109/SPLC.2008.26
Dhungana, D., Neumayer, T., Grünbacher, P., Rabiser, R. (2008): Supporting the Evolution of Product Line Architectures with Variability Model Fragments. In - (Hrsg.), Seventh Working IEEE / IFIP Conference on Software Architecture (WICSA 2008), 18-22 February 2008, Vancouver, BC, Canada (327-330). Vancouver, BC, Canada: IEEE Computer Society.
Doi: https://doi.org/10.1109/WICSA.2008.23
Froschauer, R., Dhungana, D., Grünbacher, P. (2008): Managing the Life-cycle of Industrial Automation Systems with Product Line Variability Models. In - (Hrsg.), 34th Euromicro Conference on Software Engineering and Advanced Applications, SEAA 2008, September 3-5, 2008, Parma, Italy (35-42). Parma, Italy: IEEE Computer Society.
Doi: https://doi.org/10.1109/SEAA.2008.21
Froschauer, R., Dhungana, D., Grünbacher, P. (2008): Runtime Adaptation of IEC 61499 Applications Using Domain-specific Variability Models. In Thiel, S., Pohl, K. (Hrsg.), Software Product Lines, 12th International Conference, SPLC 2008, Limerick, Ireland, September 8-12, 2008, Proceedings. Second Volume (Workshops) (39-44). Limerick, Ireland: Lero Int. Science Centre, University of Limerick, Ireland.
Dhungana, D., Grünbacher, P. (2008): Understanding Decision-Oriented Variability Modelling. In Thiel, S., Pohl, K. (Hrsg.), Software Product Lines, 12th International Conference, SPLC 2008, Limerick, Ireland, September 8-12, 2008, Proceedings. Second Volume (Workshops) (233-242). Limerick, Ireland: Lero Int. Science Centre, University of Limerick, Ireland.
Clotet, R., Dhungana, D., Franch, X., Grünbacher, P., Lopez, L., Marco, J., Seyff, N. (2008): Dealing with Changes in Service-Oriented Computing Through Integrated Goal and Variability Modelling. In Heymans, P., Kang, K., Metzger, A., Pohl, K. (Hrsg.), Second International Workshop on Variability Modelling of Software-Intensive Systems, Universität Duisburg-Essen, Germany, January 16-18, 2008, Proceedings (43-52). Duisburg-Essen, Germany: ICB.
Doi: https://doi.org/10.17185/duepublico/47116
Rabiser, R., Dhungana, D., Grünbacher, P., Burgstaller, B (2008): Value-Based Elicitation of Product Line Variability: An Experience Report. In Heymans, P., Kang, K., Metzger, A., Pohl, K. (Hrsg.), Second International Workshop on Variability Modelling of Software-Intensive Systems, Universität Duisburg-Essen, Germany, January 16-18, 2008, Proceedings (73-79). Duisburg-Essen, Germany: ICB.
Doi: https://doi.org/10.17185/duepublico/47116
Sinz, C., Haag, A., Narodytska, N., Walsh, T., Gelle, E., Sabin, M., Junker, U., OSullivan, B., Rabiser, R., Dhungana, D., Grünbacher, P., Lehner, K., Federspiel, C., Naus, D. (2007): Configuration. IEEE Intelligent Systems, 22(1): 78-90.
Doi: https://doi.org/10.1109/MIS.2007.6
Rabiser, R., Dhungana, D., Grünbacher, P., Lehner, K., Federspiel, C. (2007): Involving Non-Technicians in Product Derivation and Requirements Engineering: A Tool Suite for Product Line Engineering. In - (Hrsg.), 15th IEEE International Requirements Engineering Conference, RE 2007, October 15-19th, 2007, New Delhi, India (367-368). New Delhi, India: IEEE Computer Society.
Doi: https://doi.org/10.1109/RE.2007.26
Rabiser, R., Grünbacher, P., Dhungana, D. (2007): Supporting Product Derivation by Adapting and Augmenting Variability Models. In - (Hrsg.), Software Product Lines, 11th International Conference, SPLC 2007, Kyoto, Japan, September 10-14, 2007, Proceedings (141-150). Kyoto, Japan: IEEE Computer Society.
Doi: https://doi.org/10.1109/SPLINE.2007.22
Dhungana, D., Rabiser, R., Grünbacher, P. (2007): Decision-Oriented Modeling of Product Line Architectures. In - (Hrsg.), Sixth Working IEEE / IFIP Conference on Software Architecture (WICSA 2007), 6-9 January 2005, Mumbai, Maharashtra, India (22). Mumbai, Maharashtra, India: IEEE Computer Society.
Doi: https://doi.org/10.1109/WICSA.2007.21
Rabiser, R., Dhungana, D. (2007): Integrated Support for Product Configuration and Requirements Engineering in Product Derivation. In - (Hrsg.), 33rd EUROMICRO Conference on Software Engineering and Advanced Applications (EUROMICRO-SEAA 2007), August 28-31, 2007, Lübeck, Germany (219-228). Lübeck, Germany: IEEE Computer Society.
Doi: https://doi.org/10.1109/EUROMICRO.2007.36
Dhungana, D., Rabiser, R., Grünbacher, P., Neumayer, T. (2007): Integrated tool support for software product line engineering. In Stirewalt, R., Egyed, A., Fischer, B. (Hrsg.), 22nd IEEE/ACM International Conference on Automated Software Engineering (ASE 2007), November 5-9, 2007, Atlanta, Georgia, USA (533-534). Atlanta, Georgia, USA: ACM.
Doi: https://doi.org/10.1145/1321631.1321730
Dhungana, D., Grünbacher, P., Rabiser, R. (2007): Domain-specific Adaptations of Product Line Variability Modeling. In Ralyte, J., Brinkkemper, S., Henderson-Sellers, B. (Hrsg.), Situational Method Engineering: Fundamentals and Experiences, Proceedings of the IFIP WG 8.1 Working Conference, 12-14 September 2007, Geneva, Switzerland (238-251). Geneva, Switzerland: Springer.
Doi: https://doi.org/10.1007/978-0-387-73947-2\_19
Rabiser, R., Dhungana, D., Grünbacher, P. (2007): Tool Support for Product Derivation in Large-Scale Product Lines: A Wizard-based Approach. In - (Hrsg.), Software Product Lines, 11th International Conference, SPLC 2007, Kyoto, Japan, September 10-14, 2007, Proceedings. Second Volume (Workshops) (119-124). Kyoto, Japan: Kindai Kagaku Sha Co. Ltd., Tokyo, Japan.
Dhungana, D., Rabiser, R., Grünbacher, P., Lehner, K., Federspiel, C. (2007): DOPLER: An Adaptable Tool Suite for Product Line Engineering. In - (Hrsg.), Software Product Lines, 11th International Conference, SPLC 2007, Kyoto, Japan, September 10-14, 2007, Proceedings. Second Volume (Workshops) (151-152). Kyoto, Japan: Kindai Kagaku Sha Co. Ltd., Tokyo, Japan.
Doi: https://doi.org/10.1007/s10515-010-0076-6
Dhungana, D., Grünbacher, P., Rabiser, R. (2007): DecisionKing: A Flexible and Extensible Tool for Integrated Variability Modeling. In Pohl, K., Heymans, P., Kang, K., Metzger, A. (Hrsg.), First International Workshop on Variability Modelling of Software-Intensive Systems, VaMoS 2007, Limerick, Ireland, January 16-18, 2007. Proceedings (119-127). Limerick, Ireland: -.
Dhungana, D., Rabiser, R., Grünbacher, P., Prähofer, H., Federspiel, Ch., Lehner, K. (2006): Architectural Knowledge in Product Line Engineering: An Industrial Case Study. In - (Hrsg.), 32nd EUROMICRO Conference on Software Engineering and Advanced Applications (EUROMICRO-SEAA 2006), August 29 - September 1, 2006, Cavtat/Dubrovnik, Croatia (186-197). Cavtat, Croatia: IEEE Computer Society.
Doi: https://doi.org/10.1109/EUROMICRO.2006.21
Dhungana, D. (2006): Integrated Variability Modeling of Features and Architecture in Software Product Line Engineering. In - (Hrsg.), 21st IEEE/ACM International Conference on Automated Software Engineering (ASE 2006), 18-22 September 2006, Tokyo, Japan (327-330). Tokyo, Japan: IEEE Computer Society.
Doi: https://doi.org/10.1109/ASE.2006.42
Wolfinger, R., Dhungana, D., Prähofer, H., Mössenböck, H. (2006): A Component Plug-In Architecture for the .NET Platform. In Lightfoot, D., Szyperski, C. (Hrsg.), Modular Programming Languages, 7th Joint Modular Languages Conference, JMLC 2006, Oxford, UK, September 13-15, 2006, Proceedings (287-305). Berlin Heidelberg: Springer.
Doi: https://doi.org/10.1007/11860990\_18

Back to overview

UniLab - From University to Labour market in the 21st Century: a step forward in work-based Placements

Department of Science & Technology

Project Description

Prof.(FH) Dipl. Ing. Dr. techn. Deepak Dhungana